Solar Wind Power Charger

The power supplied by panels/turbines is automatically monitors and draws the present from the batteries if it considered necessary then charges the batteries if it require extra power than load, cuts off batteries when low voltage is identify to avoid further discharging, which is repeatedly resumes load when enough power accessible from batteries/panels/turbines,

On that type of condition it automatically regulate voltage for battery charging/discharge for compensation on temperature, accumulated charge and load stored in memory, etc

Following are its feature:

a) MCU and LCD Display

b) Brand New - Sealed Unit

c) Prevents Over-discharging

d) Rated load current: 20Amp

e) Rated charging current: 20Amp

f) Display: Battery Capacity Level

g) Operating temperature: -20 ~ + 60

h) Dimensions: 150(L)*123(W)*55(H)mm

i) Rated voltage: 12v/24v automatic detection

j) Automatic low Voltage shut off: 10.8V or 21.6V

k) Automatic cutoff voltage for charging: 14v or 28v

l) Intelligent Automatic Temperature Compensation

m) 12V/24V 20Amp Automatic & AUTO-SWITCHING

n) Automatic resume voltage - power on: 11.8v or 23.6v

o) Display: Memory of Ampage Load, Accumulated, in Ampere Hrs

p) Display: Memory of Ampage Charge, Accumulated, in Ampere Hrs

q) CPU & LCD Display, Configurable & Stored Performance Memory

r) Diode blocking prevents battery discharging through to solar panel at night

s) Australian All Electric Vehicle's Solar/Wind Power Charger Controller Regulator Prevents Over-charging

t) Australian All Electric Vehicle's Solar/Wind Power Charger Controller Regulator Maintains the Battery(ies) at full charge